=======================================================================
Xpedition Layout - Version 119.0.1459.9655
=======================================================================

Job Directory:        Z:\project_non_backup\UT_Scintilla\LayoutWorkshop\Board_Design_VX2.5.9\Tx_Rx_433MHz_work\PCB\

Design Status Report: Z:\project_non_backup\UT_Scintilla\LayoutWorkshop\Board_Design_VX2.5.9\Tx_Rx_433MHz_work\PCB\LogFiles\DesignStatus_00.txt

Fri Apr 03 07:59:08 2020

=======================================================================
DESIGN STATUS
=======================================================================
Board Size Extents  ............ 100 X 100 (mm)
Route Border Extents  .......... 98.5 X 98.5 (mm)
Actual Board Area  ............. 10,000 (mm)
Actual Route Area  ............. 9,702.25 (mm)

Placement Areas: Name             Available         Required          Required/Available
                 Entire Board     20,000 Sq. (mm)   3,114.167 Sq. (mm)15.57 %

Pins  .......................... 304
Pins per Route Area  ........... 0.031 Pins/Sq. (mm)

Layers  ........................ 4
    Layer 1 is a signal layer
        Trace Widths  .......... 0.15, 0.185, 0.25, 0.3, 0.6
    Layer 2 is a signal layer
        Trace Widths  .......... None.
    Layer 3 is a signal layer
        Trace Widths  .......... 0.15
    Layer 4 is a signal layer
        Trace Widths  .......... None.

Nets  .......................... 85
Connections  ................... 213
Open Connections  .............. 0
Differential Pairs  ............ 0
Percent Routed  ................ 100.00 %

Netline Length  ................ 0 (mm)
Netline Manhattan Length  ...... 0 (mm)
Total Trace Length  ............ 1,175.953 (mm)

Trace Widths Used (mm)  ........ 0.15, 0.185, 0.25, 0.3, 0.6
Vias  .......................... 75
Via Span  Name                   Quantity
   1-4    VIA THT Round 0.70 D0.30 DRL M0.4575

Teardrops....................... 0
    Pad Teardrops............... 0
    Trace Teardrops............. 0
    Custom Teardrops............ 0
Tracedrops...................... 0

Virtual Pins.................... 0
Guide Pins ..................... 0

Parts Placed  .................. 86
    Parts Mounted on Top  ...... 86
        SMD  ................... 80
        Through  ............... 5
        Test Points  ........... 0
        Mechanical  ............ 1
    Parts Mounted on Bottom  ... 0
        SMD  ................... 0
        Through  ............... 0
        Test Points  ........... 0
        Mechanical  ............ 0
    Embedded Components ........ 0
        Capacitors ............. 0
        Resistors .............. 0
    Edge Connector Parts  ...... 0

Parts not Placed  .............. 0

Nested Cells  .................. 0

Jumpers  ....................... 0

Through Holes  ................. 122
    Holes per Board Area  ...... 0.012 Holes/Sq. (mm)
Mounting Holes  ................ 15
